Traditional PowerHouse® 1x15
Full Details
Traditional Powerhouse® 1x15 Bass Cabinet
We've packed an array of classic features into our custom-built Traditional PowerHouse® Bass Cabinets. These cabinets provide an exceptional level of musical versatility and player convenience through the following features:
1x15 Design Features
Aviation Style Bracing - A radical bracing concept borrowed from the aircraft industry. All structural reinforcement is dado-joined and sculpted to form an extremely strong skeleton that reduces weight, increases rigidity and improves structural integrity.
Tri-Port™ Design - An innovative, front-facing, multi-vent porting system that uses individually tuned triangular ports to enhance each part of the bass spectrum. Each port is part of the structure and reinforcement of the cab AND speaker baffle in addition to its porting function. This goes way beyond the old standard “shelf” designs or plastic port holes that blow all your tone out of one large port hole!
Attenuator - Our premium L-Pad high-frequency horn attenuator provides players with the ability to fully adjust the level of the tweeter, ranging from fully OFF (bypassed) fully ON, or any point in-between for personalized high-frequency versatility and performance.
Like all Mesa® PowerHouse Series Bass Cabinets, the Traditional PowerHouse cabinets represent the world's best-built, best-sounding, easiest-to-move bass enclosures ever made! Make the comparison yourself. Then you'll understand why it's all about Mesa for Bass!
ALL MESA® ENCLOSURES are built by Mesa Master Craftsmen using the finest void-free, Marine Grade Baltic Birch. Super strong rabbet and dado joinery is glued and nailed throughout the cab’s construction, including bracing and most importantly, the front speaker baffle. Grilles are wrapped around a separate grille-board, not the baffle board. Grille material is made of strong twisted jute dipped in a special coating that filters top end for a sweeter response. You simply won't find a better cabinet.
General Information |
|
---|---|
Build Location | Petaluma, CA USA with the World's Finest Materials |
Cabinet Material | Marine Grade, Baltic Birch |
Standard Finish Options | Black Bronco Vinyl with choice of Gray & Black Weave or Black Jute Grille and Silver Piping |
Corner Material | Lexan |
Custom Finish Options | See Custom Finish Gallery |
Features and Specifications |
|
---|---|
Style/Type | Tuned Front Ported Tri-Porting™ |
Speaker(s) & Mounting Position | Custom Eminence toned for Traditional PH Cabs |
High Frequency Horn | Yes |
Wattage | 300 Watts |
Cabinet Impedance | Available in 4 or 8 Ohm (8 Ohm Standard) |
Connectors | Combination Speakon & 1/4" Input & Paralleled Output |
Horn Control | Premium Attenuator |
Input/Output Connectors | |
Nominal Impedance | |
Minimum Impedance @ Frequency | |
Average Sensitivity (RMS) 50Hz-1000Hz | |
Maximum SPL - 50Hz-1000Hz | |
Average Thermal Power (RMS) 50Hz-1000Hz | |
Average Mechanical Power (RMS) 50Hz-1000Hz | |
Minimum Mechanical Power (RMS) @ Frequency | |
Low Freq F3 (Hz) | |
Low Freq F6 (Hz) | |
Low Freq F10 (Hz) | |
High Freq Response | |
Casters | Included - Track-Loc™ Removable Casters |
Additional Features | n/a |
Accessories |
|
---|---|
Slip Cover | Included - Fitted Slip Cover |
Weight And Dimensions |
|
---|---|
Weight | 68 Lbs. |
Height | 19 1/4" |
Width | 24 1/2" |
Depth | 19 1/2" |
DISCLAIMER: In the interest of continuous improvement, all specifications are subject to change without notice. To guarantee correct fit on custom ordered cases & covers, MESA recommends that customers make personal measurements of their product, after they have been received. MESA provides these measurements as a general reference only, without guarantee or liability.