Specifications

Quick Overview

Build Location Petaluma, CA with the World's Finest Materials
Power Amp Type Light-Weight Class D Power Amp
Channels & Inputs 2 Channels / Ch 1 = Selectable XLR w/P-12 Phantom or 1/4", Ch 2 = 1/4"
Preamp Solid-State Preamp
Drive / Dynamics Control n/a
EQ Variable Hi-Pass Filter (40Hz to 200Hz), Fully Active 4-Band EQ Controls (+/- 12dB of Bass, Low-Mid, High-Mid & Treble) with Sweepable (variable) Low-Mid (150Hz-1800Hz) & High-Mid (300Hz-5000Hz) Frequency Controls
FX / Boost (solo) 3 Internal Effects Options (Chorus+Reverb, Room or Hall Reverb) with 3 Parameter Controls, Parallel FX Loop (for external FX)
Footswitchable Functions External Switching Jacks for Channel Mutes and Internal FX Bypass (Footswitches Sold Separately)
Speaker(s) & Impedance 1x10", 8 Ohm Rosette 150 Speaker & 1 - HF Dome Tweeter / Total Load = 8 Ohms
Weight 28 lbs.
Dimensions 15" H x 18" W x 12.5" D
Available Formats 1x10 (8 Ohm) or 2x8 (4 Ohm) Combos

Amplifier Features

Amp Type Solid-State Preamp & Class D Power Amp
Chassis Material Aluminum
Preamp Tubes n/a
Power Amp Power Devices Class D Power Amp
Wattage(s) Quick Reference 300 Watts @ 4 Ohms / 150 Watts @ 8 Ohms
Power Amp Details Light-Weight, Compact Class D Power Amp with Protection & Limit LED Indicators
Convection or Fan Cooling Convection (silent)
Number of Channels & Input Options 2 Channels / Ch 1 features selectable XLR w/P-12 Phantom Power or 1/4" Inputs, Ch 2 features a 1/4" Pickup Input (active or passive)
Preamp Details 2 Channels / Ch 1 features selectable XLR w/P-12 Phantom Power or 1/4" Inputs, Ch 2 features a 1/4" Pickup Input (active or passive)
Preamp Details Solid-State Preamps featuring Mute Switch with Mute Indicator LED, Clip Indicator LED, Phase Switch with Out of Phase Indicator LED, Input Level Control, FX Send Level Control, Variable Hi-Pass Filter (40Hz to 200Hz), Fully Active 4-Band EQ Controls (+/- 12dB of Bass, Low-Mid, High-Mid & Treble) with Sweepable (variable) Low-Mid (150Hz-1800Hz) & High-Mid (300Hz-5000Hz) Frequency Controls, Master FX Level, Master Volume
Internal Effects (built-in) 3 Internal Effects Options (Chorus+Reverb, Room or Hall Reverb) with Front Panel Status LED, 3 Parameter Controls & Optional On/Off Footswitch Control (footswitch sold separately)
Effects Loop Parallel FX Loop (for external FX)
Boost (Solo) Level Control n/a
Direct (DI) Line Output Options 3 Balanced XLR Direct Line Out Options: Channel 1 Only with Pre/Post, Line/Mic & Ground Lift Switches, Channel 2 Only with Pre/Post, Line/Mic & Ground Lift Switches & Channel 1 & 2 (Post EQ & FX Only) with Line/Mic & Ground Lift Switches
Tuner Output / Mute n/a
External Switching Jack Options External Switching Jacks for Channel Mutes and Internal FX Bypass (Footswitches Sold Separately)
Speaker Outputs Two 1/4" Output Jack (4 Ohm Minimum)
Slave Output n/a

Additional Amplifier Features

Extra Amp Features Headphone Output and Auxiliary Input

Accessories

Footswitch Optional (Sold Seperately) - Channel Mutes and/or Internal FX Bypass Footswitches
Slip Cover Included - Fitted Slip Cover

Cabinet Features

Cabinet Material Marine Grade, Baltic Birch
Standard Finish Options (no extra cost) Choice of British Tan Bronco Vinyl, Black Taurus or Black Bronco Vinyl with Cream/Tan Weave or Black Jute Grille & Brown or Black Corners & Handle
Custom Finish Options See Custom Finish Gallery
Speaker(s), Horn & Impedance 1x10", 8 Ohm Rosette 150 Speaker & 1 - HF Dome Tweeter / Total Load = 8 Ohms
High Frequency Horn Control & Protection 3-Position HF Dome Tweeter Level Switch
Casters or Transport System n/a

Additional Cabinet Features

Extra Features Twist-Lift Adjustable Tilt-Back System

Important Advisements

Important Advisements This model comes standard at 8 Ohms and can be used with an additional 8 Ohm speaker cabinet.

Weight And Dimensions

Weight 28 Lbs.
Height 15"
Width 18"
Depth 12.5"

Available Formats

DISCLAIMER: In the interest of continuous improvement, all specifications are subject to change without notice. To guarantee correct fit on custom ordered cases & covers, MESA recommends that customers make personal measurements of their product, after they have been received. MESA provides these measurements as a general reference only, without guarantee or liability.